Servers by jDrones

battery

Topic Replies Activity
Show battery percentage at the top by default in Tower 1 April 16, 2021
Typical flight time and tips to extend it? 58 April 13, 2021
LiFePo4 Battery Monitoring 13 April 13, 2021
Charge rate of iMax B6 3 March 5, 2021
Intelligent flight battery 21 March 4, 2021
I was wondering if the drone can enter battery failsafe cuple of times during one flight 2 February 2, 2021
Creation of New AP_BattMonitor Library for MODBUS-connected BMS 7 January 23, 2021
Connection of two LiPos 23 January 10, 2021
Foxtech 30000mah 6S Battery, any one try it? 16 January 11, 2021
Li-Ion Battery Pack Recommendations 6 November 3, 2020
Is it possible to disable battery failsafe in flight? 11 October 19, 2020
Multiple Battery Monitors: SumOfFollowing Command for BATT_MONITOR? 6 April 30, 2020
Voltage drop during flight 11 February 25, 2020
Understanding if a battery is dead 4 December 2, 2019
Pixhawk PDB Calibration Issue 1 June 11, 2019
[SOLVED] Pixhawk 2.1 Cube Power Problem (Mission Planner) 5 October 27, 2018
Smart battery full_charge_capacity does NOT get updated without a reboot 11 August 4, 2018
Calibrate Amperes (Amperes per Volt) in Battery monitor settings without Amp Meter 8 May 23, 2018
UAV Electric Propulsion System Survey 4 May 19, 2018
Mission Planner displaying battery voltage in AH window without battery connected 1 April 11, 2018
Pixhawk Dronekit Python on Raspberry Pi3 Error with Battery 1 February 8, 2018
Battery Power Curve from Logs 2 October 13, 2017
Battery Monitor missing parameters 3.8.1 1 September 6, 2017
Second battery failsafe 1 June 22, 2017
I'm not getting battery failsafe through telemetry/OSD 5 June 18, 2017
Servers by jDrones