Servers by jDrones

ArduCopter   Single/Coax


Topic Replies Activity
About the Single/Coax category 1 March 13, 2017
SingleCopter of Benjamin Prescher on Ardupilot 6 June 4, 2021
Using Digital and Analog Servos with Pixahawk 30 June 3, 2021
Noob Question on Coax Copter 27 May 11, 2021
Issues trying to get my coaxcopter to fly 10 May 11, 2021
Can someone guide me to setup single copter 4 May 10, 2021
Ducted Fan UAV Ardupilot 14 May 7, 2021
Beginner setup - servos don’t move 3 May 6, 2021
Single/Coaxial Copter 1 May 6, 2021
My first Copter and Single-Copter is finaly finished ! My advices and struggles 13 April 1, 2021
New Co-Axial Heli? 23 March 23, 2021
Problem with default PSC_POSZ_P leading to oscillation in AltHold 6 February 28, 2021
20inch props CoaxCopter tuning issue 2 February 21, 2021
All the 3D printable part of my 3D printed Single Copter 1 February 18, 2021
Not working single copter 10 February 14, 2021
Hover instability (Althold) 3 February 3, 2021
Does Autopilot placement matter - above or below CG? 5 December 13, 2020
ATC_RAT_PIT_FILT - is it safe to change it from default 20 to 5? 1 October 31, 2020
Is direction of rotation of motor critical in a single copter? 1 September 2, 2020
Anyone ever come across the X01 Project? 1 August 9, 2020
PreArm: RC Yaw not configured, No Yaw control 7 June 3, 2020
Singlecopter Setup 3 April 30, 2020
AHRS_ORIENTATION Help 17 April 14, 2020
LAND mode - drifts with the wind 8 March 17, 2020
Trouble with trim 5 March 15, 2020
New Coaxcopter Model 5 February 10, 2020
Single Copter with Gasoline engine settings 39 January 12, 2020
SingleCopter project, progressing again 25 October 19, 2019
Throttle coupled into yaw on SingleCopter? 9 October 18, 2019
Single & CoaxCopters with AC3.5 9 June 9, 2019
Servers by jDrones