Rover 4.1

Topic	Replies	Views	Activity
Skid Steer rover turning in circles	3	533	April 19, 2022
Rover-4.1.5 released! stable-release	6	2061	March 7, 2022
Skid Steer mid throttle trim always powers up at 1000pwm	0	249	April 16, 2022
Converting a Spider mower to autonomous operation	6	940	April 14, 2022
How does the relay work?	2	361	April 13, 2022
Only two wheels turning, no speed control and Radio control	26	1960	April 8, 2022
Should I start developing with ROS(1) and MAVROS	1	465	April 7, 2022
Control four wheel steering via Can bus.	0	225	April 7, 2022
Arduboat problem LOITER	3	536	April 4, 2022
Output channel mapping for Skid steering pixhawk	3	387	April 3, 2022
Sending PWM output?	9	448	April 2, 2022
Rover just wonders off	0	240	March 31, 2022
Controlling 2 AUX ports with a single 3-position switch	0	402	March 31, 2022
Param EK3_SRC(x) not found	4	745	March 30, 2022
Tuning tips for my new Autonomous Jet boat	22	2060	March 22, 2022
4.1 is strange and roll back issues	4	372	March 18, 2022
Rover-4.1.3-rc1 released for beta testing beta-testing , beta-release-2	4	973	March 15, 2022
Mavlink cannot connect error	5	714	March 15, 2022
Rover "Tug" - Fine Tuning Steering Parameters	4	1250	March 7, 2022
Difficult to tune throttle in a 1 / 5 Kraton 8S RC CAR ¿way too powerful or just bad tuning?	3	684	March 6, 2022
Backing off from obstacles stopped to work and I don't know why	3	625	March 1, 2022
Why am I getting a "Send error"?	0	232	February 26, 2022
DroneCAN Moving Baseline GPS not detected on boot	0	502	February 24, 2022
Rover and Bendy Rule	0	308	February 23, 2022
BalanceBot with normal pendulum body	4	627	February 16, 2022
Understanding history and logic of MOT_SPD_SCA_BASE	17	1741	February 14, 2022
Rover-4.1.5-rc1 available for beta testing beta-testing , beta-release-2	0	384	February 11, 2022
Question about rotate in AP_MATH matrix3.cpp	2	439	February 10, 2022
PPM input signal on a OUTPUT Channel	11	1419	February 9, 2022
Rover-4.1.4 released! stable-release	1	1239	February 8, 2022