Servers by jDrones

ArduCopter   Copter 3.3


Topic Replies Activity
Where can I find MavLink messages code #166 4 January 19, 2018
What is the benefit of running multiple compasses on Pixhawk? 9 January 12, 2018
How to assemble ArduCopter pi 3 with raspberry pi 3? 2 January 7, 2018
Auto mission problems 1 December 27, 2017
AC-3.3 X4 copter uncontrollable Yaw spin descent to ground 2 November 11, 2017
SBUS out questions 8 November 8, 2017
Outdoor LED and GPS do not work at a time 12 October 5, 2017
Large quadcopter flip and crash 21 October 2, 2017
The Accuracy of Attitude Estimation 3 September 25, 2017
My Multi-copter did not stay at the altitude I planned during autonomous takeoff 6 September 7, 2017
Copter Altitude Accuracy 4 August 10, 2017
Incorrect voltage readings from power module and/or pixhawk 16 July 21, 2017
What ESCs Support Motor RPM Logging? 1 July 15, 2017
First mission item overwritten 2 July 4, 2017
APM3.3.3 PX4 flow test,MP warning:"EKF variance" 2 July 1, 2017
Flight time frustration 23 June 18, 2017
External LED not working 3 June 14, 2017
Instant flip to the left on firmware v3.3.3 AND v3.4.6 1 May 30, 2017
Copter 3.3 camera gimbal sutter seting 2 May 26, 2017
Problem w/ Downgrade to 3.3.3 using Mission Plannner 1 May 25, 2017
Unable to update / change SR0 settings in Full Params 6 May 23, 2017
Which MAVLink commands can fly a copter without GPS? 4 April 14, 2017
Mission planner 1.3.36 survey grid problems 2 April 11, 2017
Missing Dataflash Log Files - ArduCopter 3.3.3 1 April 11, 2017
Help with collision avoidance 2 April 6, 2017
Waypoint controller produces a large target position delay 1 March 30, 2017
Loss of control and warnings after power cycling 1 March 27, 2017
Extreme Roll/Pitch Oszilation, near crash 1 March 20, 2017
Use mavros setpoint_raw/attitude wtih no GPS 3 March 15, 2017
Pixhawk and LIDAR-Lite Rangefinder in AUTO mode 3 March 14, 2017
 
Servers by jDrones