Servers by jDrones

APSync / Companion Computers


Topic Replies Activity
About the APSync / Companion Computers category 10 April 19, 2018
Apsync for Jetpack 4.2 on Jetson TX2 7 January 23, 2020
New APSync Build for Raspberry Pi 7 January 20, 2020
Sending command from rpi to px4 to spin motors in test mode to x% 1 January 18, 2020
Can I Use Raspberry Pi 4 Model B for Companion Computer? 6 January 15, 2020
Old content loaded on https://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html 7 January 14, 2020
I cannot login into raspberry pi 5 January 2, 2020
How to connect jetson nano to pixhawk 11 December 20, 2019
Dose Dronekit on_mesage listioner use recv_match in mavutil? 1 December 16, 2019
MavProxy.py "link 1 down" w/ RasPi 26 December 15, 2019
Mavlink messages not parsing with Cube-Orange and RPi 3B+ 4 December 11, 2019
APSync License type 2 November 14, 2019
System periodically gets delayed commands 1 November 4, 2019
Companion Computer used (also) as OSD - help needed 8 November 1, 2019
RPi3B: link 1 down on MAVLink 4 October 27, 2019
Jetson TX2 carrier 15 October 23, 2019
wait_Ready=True causeing code not run and time out 8 October 11, 2019
Correct Raspian and ROS versions to install MavRos 2 October 8, 2019
APSync on RPi3 - Video issue with QGC on IOS 2 October 6, 2019
IMX 6 Solo to Pixhawk 2 Carrier 36 October 4, 2019
TYPO in the create atribue example my_vehicle.py? 5 October 2, 2019
Apsync for Pi3 B+ 3 September 27, 2019
Shutdown of companion computer post flight 4 September 27, 2019
Communicating using RPi through USB 4 September 18, 2019
Can I set desired roll, pitch via companion computer? 1 September 13, 2019
Timing Issues with Pixhawk and TX2 6 September 3, 2019
Changing securtiy (Auth) type to WPA2? 2 September 2, 2019
I need help Interfacing 3DR solo pixhawk with RPi 16 August 27, 2019
Nvidia RedTail up and running 20 August 26, 2019
Companion Computer without APsync 5 August 24, 2019
Servers by jDrones