Copter 3.1

Topic	Replies	Views	Activity
Jeremi_hazan@walla.com	1	829	May 4, 2018
DJI M100 possible to control from mission planner	1	840	March 27, 2018
RC not calibrated error	9	1402	March 25, 2018
Need help on connection between Arduino and APM 2.8 for simple Sonar Obstacle avoidance	0	1083	March 15, 2018
Modifying Traditional Heli	7	1430	March 12, 2018
Gps module otherthan neo	3	986	February 9, 2018
hMotors doesn't start slow spin when armed with BlHeli ESC	9	1881	February 5, 2018
Apm mini 3.1 Can not set logging on	0	713	January 17, 2018
Copter 3.1 tuning problem	2	889	December 31, 2017
Quad Fell out of Sky	4	1394	October 8, 2017
APM2.8 ir-loock	0	838	August 24, 2017
R12DSM Receiver Help!	5	1783	August 17, 2017
Help with telemetry parameters	8	3122	August 12, 2017
HW:Apm 252 SW:3.1.5 - flash chip replacement	0	941	August 3, 2017
Setting the maximum descent rate in APM	7	3141	July 30, 2017
Quad Crashes after thrusting vertically up	7	1674	July 27, 2017
Low KV Autotune problem	2	1191	May 31, 2017
New Flight mode SITL	3	1444	April 22, 2017
APM V3.1 Channel in and Channel out	10	1597	March 30, 2017
Problem apm 2.6	4	1221	March 29, 2017
Translate ptich/roll angle to PWM output for servos?	1	1045	March 26, 2017
APM Mini v3.1......Need someone to modify Arducoptor code...please	1	1095	January 29, 2017
Error PID.h DataFlash.h ? what will i do?	0	1535	January 20, 2017
Quad flips on landing in Loiter - uneven ground?	0	1055	November 21, 2016
Quad flips upon takeoff	1	1120	November 21, 2016
APM 2.8 vibration Accz too much and away 0 level log , arducopter	1	1348	November 17, 2016
Altitude lost and regained in Guided mode, but holds steady in Auto mode	0	972	November 16, 2016
Transmitter flight mode for using guided mode on ground station or tablet with Tower App	3	1283	November 16, 2016
APM 2.5 not throttling up	20	3732	October 18, 2016
Baro Glitch cause crash	2	1375	October 5, 2016