Servers by jDrones

ArduRover


Topic Replies Activity
Need an ASV in one month - anyone up for a contracting engagement to help? 1 February 14, 2020
For Sale: Aluminum ArduBoat Hull (1M Long) 3 February 14, 2020
Motors not running at full power 2 February 14, 2020
What a boat do in GUIDED mode? 1 February 14, 2020
What Size Diameter Motors Are You Using 1 February 13, 2020
What is the correct firmware for pixhawk 2.1 2 February 13, 2020
Motor Drivers for Skidd Steer Vehicle 2 February 13, 2020
Rover-4.0.0 released! 49 February 12, 2020
Ardurover Balance Bot 3 February 11, 2020
Avoid_Behave for Boats 2 February 11, 2020
SERVO MIN and MAX 2 February 10, 2020
Rover 4.0 mis_done_behave Problem 1 February 9, 2020
Weird behavior in tracked vehicle when STEER_TYPE=1 7 February 9, 2020
Failsafe Settings 2 February 9, 2020
RELPOSNED.. How to calibrate absolute heading 13 February 6, 2020
BRD_SBUS_OUT = 1 doesn’t work, any ideas? 1 February 5, 2020
Rover not having any throttle output in manual mode 7 February 5, 2020
Skid Steer Tank Motor Test Problem 11 February 4, 2020
Turning skid steered boat during auto mission 3 February 4, 2020
Rover channel software description / flowcharts 8 February 4, 2020
Object Avoidance not working 1 February 3, 2020
ESC recommendation for hubmotors 7 February 3, 2020
Rover 4.0 uses EKF3 as a filter, the GCS connection rate is only 10%, and there is no problem using EKF2 2 February 3, 2020
Problems with Initial Mode "Auto" ,instead goes to Hold 8 February 1, 2020
Ultralight Gyroplane Ardupilot mentor? 1 February 1, 2020
Non-GPS navigation indoors with encoders: possible? 6 February 1, 2020
New automatic Winch for USV 1 January 31, 2020
PIDA / PIDS information on TLOG 3 January 30, 2020
Pixhawk 2.4.8 + super500 servo 2 January 30, 2020
Sailboat Support 523 January 28, 2020
 
Servers by jDrones