Servers by jDrones

Ground Control Software

Tower Discussions and support requests for Tower
Andropilot Discussions and support requests for Andropilot
Other GCS Discussions about other GCS software
Mission Planner Discussions and support requests for Mission Planner
APM Planner 2.0
MAVLink This topic is to talk about MAVLink and communication with ArduPilot from external devices like a GCS
QGroundControl Discussions and support requests for QGroundControl <a href=""></a>

About the Ground Control Software category [Ground Control Software] (2)
Xplane 11 with mission planer [Mission Planner] (1)
Mission Planner Heli Setup Page Grayed Out [Mission Planner] (2)
Controlling pitch,yaw and roll for object tracking [Ground Control Software] (3)
I can not connect to my arducopter (no installed com port) [Mission Planner] (7)
Geotagging Won't Import to PX4D [Mission Planner] (2)
How to connect QGC and pixhawk with wire?(tethered drone)Is it possible? [QGroundControl] (4)
In planning a mission what is just before Verify Height [Mission Planner] (3)
Is there a structure/function I can reference that checks if the waypoint has been reached? [Mission Planner] (3)
Has anybody managed to get QGroundControl GCS working on RPi? ( 2 ) [Ground Control Software] (29)
Mavproxy startup option [MAVProxy] (12)
How to create your own custom messages in MAVlink? [MAVLink] (4)
Mission Planner "Makeover" ( 2 ) [Mission Planner] (29)
New MP HUD I have been working on [Mission Planner] (6)
QGroundControl version 3.3 available ( 2 ) [QGroundControl] (21)
Set camera mount to RETRACT or NEUTRAL during AUTO mission [Mission Planner] (2)
No models available on firmware update page? [APM Planner 2.0] (4)
RTSP Still not working right QGroundControl [QGroundControl] (3)
APM Planner 2.0 Mac usb issue ( 2 ) [APM Planner 2.0] (27)
How to cross-compile QGroundControl for Raspberry Pi3 [QGroundControl] (4)
Issue with Frame Type Select [Mission Planner] (4)
Building without SDL2 [APM Planner 2.0] (1)
Announcing QGroundControl 3.2 [QGroundControl] (10)
"invalid comport or in use" problem [Mission Planner] (18)
Need advice for building your own GCS [Other GCS] (11)
"MAVPROXY" ignores command [MAVProxy] (11)
How to get the Uniue Serial ID of the pixhawk using MAVLINK? [MAVLink] (5)
Multiple mission planner on one Quad [Mission Planner] (1)
Telemetry & OSD + navigation [QGroundControl] (10)