Hey out there.
Looking for recommendation on an AIO board. One that is known to run Arudcopter.
I need the ability to have GPS, on board Baro preferably and I2C for external compass.
Let me know your thoughts please and thanks.
@rickyg32
take a look at the flywoo https://flywoo.net/collections/aio-evo-fc/products/goku-gn745-40a-aio-bl_32-mpu6000-25-5-x-25-5. I believe @MaxBuzz has used them on a tiny build with success. I have a cpl running BF without issues they seem to be good quality.
1 Like
There is a post today with one on a 6" Rekon.
My FC for my tiny build is JHEMCU GSF405A, which is:
- quite feature-rich: Ardupilot-capable, lots of UARTs, built-in ELRS etc;
- lightweight (3.3g), but its ESCs are 2S and 5A only, so you will not have a lot of spare thrust available;
- and the build quality is not high.
Yet another hint for @rickyg32 is that many of these boards are supported starting from Copter 4.2 onwards, which is contrary to Copter 4.1 topic category, but since Ricky looks for a new board, it seems that using a newer firmware is not a problem anyway 
1 Like
I have a Flywoo AIO board on an 85mm Whoop frame. You can read more about it here if you like.
This board also has an I2C port for an external compass.
https://flywoo.tawk.help/article/goku-gn745-aio
Hey thanks for this.
IS it 40 amps per channel or 40 amps total.
1 Like
it is 40amp per motor. I love these boards they are back in stock although for a bit higher price.
1 Like