Hexa with Hobbywing X8 motors

ArduCopter
1

Hi
i am building a hexacopter with
1.) hobbywing x8 motors
2.) flight controller pixhawk PX5
3.) battery 12s 22Ah
4.) wheel base of around 1800mm
5.) estimated weight around 17kg without payload

i am looking if anyone has already tuned this type so i can get a head start. looking forward

thank you
Mike

2

@Mike4 Please build F550Hexa frame. Configure pixhawk on f550 hexa. Autu Tune with F550. after make some missions, if all auto missions are good enough, transfer all setup to your big hexacopter.

while you are working with small(f550Hexa)hexa you need to follow these steps Initial Tuning Flight — Copter documentation
while you are working with big(f550Hexa)hexa you need to follow these steps
Initial Tuning Flight — Copter documentation

at final you need to tune manually seeing logs.

same method i tried FYI check this link Pitch commands cause some yaw.🤔 I did not tune the copter - #53 by SWARNA_MOHAN_CHANDRA