Trying to get a 5V gripper to work on a speedybee f4 v3. I have loaded a custom build of ardu with the grip_enable params and set it to CH11 on my TX. Servo page is showing PWM values change when vehicle is connnected but no response on the servo. I have tried multiple servos and put this one on a servo tester. Works fine.
![image](https://discuss.ardupilot.org/uploads/default/original/3X/0/d/0d8b9f52a7768e77b326e7b69ed1f01bc05b8168.png)
![image](https://discuss.ardupilot.org/uploads/default/original/3X/c/2/c25f6f306e75d595417607c3308a5b25c7f2347f.png)