3DR multipoint connection to single GCS

Hi! I want to connect multiple 3dR modules to a single GCS to perform relay communication.
The procedure shown in the link Multi-point Telemetry — RISC-Docs 0.1 documentation doesnt really workout. The line git clone https://github.com/RFDesign/SiK.git says unable to find the server. can someone help me out with this.

Best regards,
Sejal

Hi Sejal,

The old link is gone. I tried to save it by cloning:
MultiSik

Good luck.

That’s awesome! thank you so much

Also just wanted to confirm if the single telemetry modules as described in the link are connected to flight controller or to a companion computer like raspberry pi. Would be great if you could let me know.

Best regards,
Sejal

Hi,
The general documentation how to use the Sik-radios (independent of point-to-point or Multi-point fw) can be found here.

You may find some more helpful info about multi-point connection in the well written blog from ppoirier.
The blog can be found here: swarming experiments.

Good luck.

1 Like