The repeater feature works only between two ground units. There is no plan to support more units at least for now
1 Like
@SIYI thanks for your reply, i would like to know if i bought the repeater combo from SIYI HM30 REPEATER Combo or the dual combo from SIYI MK32 DUAL Combo, will i get a compatible air unit with them or should i buy the air unit alone?
You have bought a system and you need to confirm what you have bought, am I right? If so, please write to support@siyi.biz directly for this purpose, thanks
1 Like
hi , no i didnt buy the system yet, i just need to confirm if the air unit is included with the repeater and combo packages when i buy them.
This MK32 HM30 Repeater Combo works for this
does the MK32 has a encryption when communicating with the receiver such as 3Des, AEST 128 or other types of encryptions?
Dear:
Yes. The ground end of MK32 encrypts data during wireless communication with Air Unit. But we haven’t made the encryption method public.
Best regards,
SIYI Technical support Tony Wang
General Support
Product Inquiry / Customer Service / Technical support
86 - 176 8879 2213 (Wechat / Whatsapp)
support@siyi.biz
思翼科技（深圳）有限公司
SIYI Technology
Empower and build an intelligent robotic ecosystem.
https://siyi.biz/en - SIYI Official Website
http://shop.siyi.biz - SIYI Official Store
https://www.youtube.com/@SIYITech - SIYI YouTube Channel
IMPORTANT NOTE: This email and any attachment are confidential and may contain trade secrets and may also be legally privileged or otherwise protected from disclosure.
If you have received it in error, you are herewith informed about its status. Please notify us immediately by reply email and then delete this email and any attachment from yo-
ur system. You are prohibited from making use of or copying this email or any attachment or disclosing the contents to any other person.
<Disclaimer in Chinese below, characters may not be displayed correctly.>
重要提示：此邮件及附件具保密性质，包含商业秘密、受法律保护不得泄露。如果您意外收到此邮件，特此提醒您此邮件的机密性，请立即通知我们并从您的系统中删除此邮
件及附件。如果您不是此邮件应当的收件人，请注意不可对此邮件及其附件进行复制或向他人透露其内容。
Hello,
@SIYI I’m setting up an MK32 system on a PX4build. I have updated firmware from the MK32 pack on the website. (Air unit is now on 5.2.8 and Ground Unit is on 0.1.6)
I have bound the Ground Station to the Air Unit and have solid green lights on both units, but when I attempt to configure in SiYiTX/Systems, I get an alert that the “RECEIVER NOT CONNECTED”.
The Air Unit is not connected to a flight controller currently, only 4S Lipo>BEC>Air Unit with Ground Station powered on (antennas attached to both units), bound, and showing green status LED on both units.
I noticed the Air Unit originally had 5.3.1 FW and actually downgraded to 5.2.8 which is what was included in the MK32 FW pack on the website. Can you assist me with this? I cannot find 5.3.1 online anywhere to go back to it, and I’m not even sure that is the issue.
Thanks,
-Dylan
1 Like
@SIYI Here are the screenshots. All appears connected and normal, except I cannot alter any of the settings of the air unit.
Also, now the air unit is blinking slow red, which, per the manual means a firmware mismatch. The air unit firmware in the Mk32 Firmware Pack on the website is 5.2.8. Can you send me 5.3.1 or a link to it?
Thanks for the pictures
It’s clear that you just need the latest RC firmware pack, which is here
https://drive.google.com/drive/folders/1Rjec0_Rf-UG2KrKPwNg19MvT9R-_Vniu?usp=drive_link
For anyone who would like to upgrade firmware, if your existing firmware is higher version that the website firmware pack, please do not bother to upgrade them
There is a reason we do not post the latest firmware on website as they work with Ground FPV Firmware 0.2.6 only and the steps to upgrade FPV firmware is very complicated and risky for most customers even with factory guide
1 Like
Thank you! All good and works like a charm.
1 Like
What is the pinout of the LAN port of the Mk32?
In the manual there is no information.
On the ground unit it says “RT-+” which is confusing.
I have send 3 emails to support, but no replies.
We are currently in holiday until tomorrow
- R = RX
- T = TX
Thank you. What are the LAN connections of the 4 pins?
I believe there is already an RJ45 cable coming with the MK32 package. Haven’t you received it?
Please write to support@siyi.biz to get support for this issue directly, if it didn’t work, welcome to get back to me and I will help push
I have send 3 emails to support. No answer.