I’m not well versed in Tracker, but in the interest of getting you a reasonably quick answer, this topic seems to have some good discussion regarding 360 travel:
Greetings!
I am having issues with the Antenna Tracker which is built into Mission Planner (Initial Setup > Optional Hardware > Antenna Tracker).
It seems to be misbehaving in 2 strange ways:
The position that the tracker assumes when the Maestro Controller is connected from Mission Planner and the trim is set to 0 (Center PWM - 1504), does not correspond to the same position as when the same PWM value (1504) is set in the Maestro Control Software.
The Tilt channel is seemingly ignored/b…