Please repair that "translate arrows" for DJI-O3 will work again

ArduPlane
1

If added this future it worked well, but actual stable 4.4 and some versions bevor the home-arrow shows verry wrong.
It would be fine if somone could fix it again.
I see no difference if set translate arrows to 0 or 1, looks like inactive or missing code.

Sepp

2

fix is in the “latest” firmware and
MSP_OPTIONS = 4
OSD_OPTIONS=33
OSD_TYPE=5
SERIALx_PROTOCOL = 42
was supposed to be in 4.4 but did not make it…trying to get it backported into 4.4

for now use “latest”…will be in 4.4.2 release in a few weeks

3

Stopping by to ask if using ‘latest’ is still viable, given Plane 4.4.1 was just released?

I’ve a DJI O3 in use with a Pitch 180 oriented AHRS and the L/R is good, but Fore/Aft is inverted on the Home/Waypoint arrows.

4

As info, I did the ‘latest’ - v4.5.0dev at this time - and the translate arrows did indeed resolve the wonky arrows. Thank you.