Pix mini 4.1dev Nooploop Linktrack set

[angel12 (Yang)]

Nooploop LinkTrack cannot be used

https://ardupilot.org/copter/docs/common-nooploop.html Can non-gps navigation be used normally now？ After setting up according to the tutorial, I found that the flight controller could not recognize the beacon。Is my setting wrong or the beta version does not support uwb beacons?

I set up in accordance with the above method, but the flight control system is unable to identify to nooploop data。I don’t know where is wrong。

Nooploop LinkTrack cannot be used

https://ardupilot.org/copter/docs/common-nooploop.html Can non-gps navigation be used normally now？ After setting up according to the tutorial, I found that the flight controller could not recognize the beacon。Is my setting wrong or the beta version does not support uwb beacons?

I ask questions but there is no reply to me.

I don’t know what to do, please help me.

[angel12 (Yang)]

Has not positioning

[chobitsfan]

Hi @angel12
You do not need that arduino board. You can connect nooploop linktrack ss to to flight controller.

[angel12 (Yang)]

I direct connection, but there is no effect, so try to use the arduino, but useless.

[angel12 (Yang)]

https://ardupilot.org/copter/docs/common-nooploop.html
Why I can’t make my flight control positioning according to the tutorial