No throttle output from mini pix radiolink

ArduCopter Copter 3.6
1

set up mini pix radiolink for helicopter

after complete radio calibration, there is no throttle output from ch 6 of mini pix.

Swash plate calibration was successfully done.

please let me know if anyone knows

thanks so much

2

do you have telemetry connected ?
last time when i use my telemetry with QGroundControl virtual joystick enabled , my radio controls throttle stick was not working because FC responding to telemetry instead radio control.

3

thanks so much for reply. I have no telemetry with Qground control. All i have is only MP of radiolink.

By the way, if i switch from “helirsc” to RCIN3 which is throttle input,then there is coming out throttle signal from ch6.

thanks you

บนวันอังคารที่ 25 มิถุนายน 2019 02 นาฬิกา 57 นาที 05 วินาที GMT+7, hosein gh via ArduPilot Discourse, noreply@ardupilot.org เขียน:

hosein_gh

    June 24

do you have telemetry connected ?
last time when i use my telemetry with QGroundControl virtual joystick enabled , my radio controls throttle stick was not working because FC responding to telemetry instead radio control.