I am waiting for that video converter that @SKYDROID mentioned.
However, I cannot fly I am grounded until a new motor and a new esc shall arrive, which is a bummer. I was so anxious to test my new t12.
1 Like
Nice to see this thread is still active and everyone is still helping one and other.
What a great hobby
1 Like
yes it is, and Skydroid is releasing great products! One suggestion is, would we see 4G /5G based control/cam system someday with unlimited range from Skydroid?
1 Like
Dear all
I received my T12 a few days ago. Binding was very easy … however after installing skydroid apps on my Sansung Galaxy A6, when I tried to connect via usb with the radio, I have no success. The apps seem to be working normally, but I have no response from the radio, nor camera image in App fpv. Can someone give me a support?
Thank you
1 Like
Congrats Bob.
Did you try by Bluethoot?
1 Like
Hi Bob,
Congrats on your new radio.
If you haven’t done so yet, I would recommend Skydroid’s video where you can get almost all answers.
First you need to make sure you have installed latest versions (if you haven’t) from here. and the settings helper from dropbox’s root dir.
Make sure you update everything, both radio tx and rx.
After you turn on your radio, open your A6 settings->Bluetooth->seach->T12_… ->pass 1234
In Tower at the bottom left select ML10 and not T12. Then you would have the Bluetooth option to connect. Once connected you should see your vehicle’s data and video.
If using QGC, click on the settings->comm->select Bluetooth and give a name->scroll down to button and save.
Now click connect and you would see your vehicle’s data.
Connect the radio’s USB cable to the bottom left port on radio and usb-c or mini to your A6. Now turn on FPV app and it should show your video. On FPV app settings you need to enable it to run as floating window (can’t remember the name but you’ll figure it out) so you can place it over QGC.
Connect your device using Bluetooth, and start Tower. With tower you don’t need any cable.
You would need the cable only if you plan to use QGC for video (Tower works with the video directly).
HTH,
Gal
2 Likes
Hi cala2 ,
No, did not !
I’ll try at night and let you know the results!
Tks
2 Likes
Hi Gal
Gonna try as you explained…
Thank you very much.
1 Like
Dear all, hello.
As suggested I tried to connecting tx using Bluetooth.
It worked.
I’m a little disappointed, because in my understanding the cable connection is safer since it does not suffer interference. Regarding the use of the camera, I made the connection with the USB cable … the app says it is connected, however nothing appears on the screen, everything is black. Trying to make the image appear, I carelessly gave command to record and take photos. I only realized this later when I checked the tablet’s internal storage and found videos and photos in perfect condition.
In resume: the camera works and the app controls it, however the image does not appear online … any ideas?
1 Like
Sorry I dont have video with the radio but one thing you can try is to use another usb cable just in case, I didnt have issues with bt connection but without video, I have a M12L,
1 Like
Hi Bob,
I had the same problem, no video.
For me it was that the software wasn’t the latest version with a bug fix from Skydroid.
HTH,
Gal
1 Like
Hi Gal
I’m sorry , I didnt undestand…
Didi you solve the problem?
1 Like
Hi @BobJ, yes I did, by installing Tower latest version and FPV latest version and than, update firmware on both tx and rx.
HTH,
Gal
2 Likes
Just wondering how the serial converter is going? The missing link to great things!
3 Likes
Dear All
The video online still not working…
My firmwares are both 3.4. RX/TX
I’m not sure if my VPV app is the last one. Please could anybody confirm?
Any other ideia about the video issue ?
Thank you
1 Like
What version for FPV app and Tower app?
1 Like
Look my answer at post 1417, there you have the links
1 Like