Lidar questions for avoidance on slow moving rover

Hello, following the answers arround avoidance modes, and promissing future arround that, i have some questions that i could not answer by searching through the posts.

Which lidar would be recommended for a slow (up to 2m/s) rover for front 60-90 degrees sector outdoot object avoidance ?
I am looking at lidars up to 250 usd. Can I set up a lidar lite v3 or lite HPv3 so i get the front sector covered.If that involves adding another arduino and some rigging i am fine. Could i use LS02 Solid State 2D LIDAR - 86°, 4m on pixhawk ?


Ok, after some reading i decided to try with rplidar 360.