I experienced an incident with my Skywalker 1900 today. During a normal launch using a cube, the drone reached takeoff altitude and headed towards the mission’s initial waypoint. Upon arrival, it suddenly inverted and crashed. This was not my first flight,with this drone. Reviewing the log didn’t reveal any errors. I’ll share the log here; any assistance would be greatly appreciated. Thank you."https://drive.google.com/drive/folders/1X2MdgxGDj518Gg5i8PS5w-BzI_AyBzMK?usp=drive_link
The *.bin log file from the SD card would be much better. It records much more data than the tlog file.
Rolf
Hello Rolf, I lost my drone in that accident, i just have this Tlog. I know the .bin log file is much better. If you can analyze and extract as much information as possible with Tlog, so I can try to understand what happened, I will be very grateful.
Thanks a Lot
Eizo
That’s annoying, maybe you can find it in the woods. The crash site can be narrowed down. But sometimes you need eagle eyes to find a model aircraft in high deciduous trees.
I’m sorry, I can’t contribute anything relevant. Perhaps others who are more familiar with analysing *.tlog files can comment.
Rolf
Thank you for your time Rolf, I will try to recover, but the location where it fell is difficult to access, if someone was able to analyze this Tlog file I would be grateful, I think the servo may have crashed, but I don’t know if the value of a servo like the aileron has something wrong, if someone can find it I’ll be happy, thank you !
Hello @Rolf, 2 months ago, this same drone had a similar accident, it didn’t break completely, and last week the accident in the previous log occurred. I don’t know if it was the same problem, but I suspect that an aileron servo may have gotten stuck during a turn, I’ve had issues with the servo in the past. I will send the Log .bin of the past accident, if you can help me investigate, I will be grateful.
Note: The file is in the same link (.bin)
Eizo