How is difference fail-safe or minimum voltage between li-ion semi-solid stage and li-po battery.?

[airton_dep (Airton Depauli Junior)]

As a general rule, Shawn made an excellent guide here:

Parameters related to battery chemistry

Here’s the whole run-down: Batteries Hi Crt Lipo 4.2 3.3 LipoHV 4.35 3.3 LiIon 4.1 2.8 These are the generally accepted values. Some LiIon cells may have a slightly different critical voltage, but all Lipos are the same. In MissionPlanner Initial parameters (and the spreadsheet) BATT_CRT_VOLT = (bat critical voltage + 0.2) x no. of cells BATT_LOW_VOLT = (bat critical voltage + 0.3) x no. of cells BATT_ARM_VOLT = (no. of cells - 1) * 0.1 + (bat critical voltage + 0.3) x no. of…

But you should check with the manufacturer, especially the minimum voltage under load.