Benewake TFmini not working on kakute F7 mini

[Dave84 (David)]

For check it with the benewake gui tool you need a TTL board… you can find info here

Benewake TF mini Setup

I installed this firmware from your earlier post, and in my case it looks like it is ok. It all uploaded correctly using the firmware updater programme that was in your post then I opened the TF GUI (in Siya’s later post) and it connects and reads ok. So I’m not sure how it can damage some boards - unless some of hardware is different. I connected to the TFmini with a custom cable I made from the one that came with the TFmini and using a FTDI232 adaptor I had lying around. (The custom cable loo…