BATT Parameters FS adjustments for hexa with 6s 3700mAh

[flyespen]

Hi Karl,
Tnx, as I wrote, No data if/when ESC will cutoff but hope drone will be landed already.
The voltage checker I created, and there is no current chk so the current is wrong. Current is the blue colored in the plot. Anyway, I need help to gestimate the Current draw. Tnx

Battery monitor on a Walkera Tali 6S with Pixhawk

Hi! I have an old Walkera Tali H-500 trying to retrofit a Pixhawk clone from HK. Problem is that I cannot monitor Voltage or Current. Tali H-500-Z-18 Powerboard connect to Pixhawk Howto power Pixhawk and meassure V and A ? Connected a Ubec to the 12V output or the 6S on the powerboard. This will supply about 5,2v to my 6pin Pixhawk Power input: Pin 1&2=5.2v+ (red from ubec) Pin 3=4.80v+ (white from powerboard at about 6S=25V) Pin 3=4.35v+ (white from powerboard at about 6S=23V) Pin 4=4.98v+…

Regards Espen