I wrote to support@siyi.biz and didn’t get any respond.
Please write down your email date and topic, thanks
10.11.2023 13:05 “Upgrade firmware in MK15 air and ground unit to latest firmware from november”
Hi Frank
I have bought Siyi HM 30.
I’m setting it up for the first time.
But I’m unable to log in on the web interface. It asks for username and password. Username - admin. Password - I have put admin, but its showing invalid. I have also tried 1234, 12345678 etc.
I have set up IP of my PC as 192.168.144.20
Gateway as 192.168.144.12
Camera IP is 192.168.144.25
The camera IP is pinging but I’m not able to see the web interface on IP - 192.168.144.25. Instead the interface is opening on 192.168.144.12.
Im also not able to setup QGC on PC or mobile as well after reading manual. Only easyplayer is working. Please help.
Guys, please tell me, I don’t know where to write and where to find it. I don’t have time to do it myself right now. but I would be grateful if someone could provide the camera gimbal files for siyi mk-15 for 3D printing
Which camera model do you refer to?
I’m also interested in localization into Russian and building missions in qgc or mp
1 Like
Hi,
Can I use a different ip camera instead of the SIYI camera? The SIYI camera is too big for my aircraft. Can I connect the camera in the link with RJ45 feature to the airunite? Is any configuration required?
Thank you.
The link does not open
Could you send a screenshot here, please?
Specification
Image sensor: 3 million pixels 1/2.9" sensor
Lens: 3.6MM
Features
Day and night switch: support day and night switch (support optional IR-CUT)
Shutter: 1/25-1/10000
White balance: support automatic white balance
Backlight compensation: support backlight compensation
Digital noise reduction: support 3D noise reduction
Wide dynamic: support digital wide dynamic
Motion detection: support motion detection
Privacy mask: support four areas
Mirror: support mirror
OSD: Support OSD setting, position can be adjusted at will
Timing restart: support timing restart
Feature
1.3 million network HD camera
2. Support standard ONVIF protocol,
3. Lens: 2.8mm/3.7mm optional;
4. Mobile APP: P6SLite
5. Ethernet RJ-45 10M/100M
Network protocol HTTP, TCP/IP, IPv4, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IPFilter, PPPOE, DDNS, FTP, IP Search(Support P6S IP camera, DVR, NVS and etc.)
6. Access protocol Support ONVIF protocol/private protocol/CGI
Thank you.
I see
It looks like a normal IP camera and it will work with the SIYI link through Ethernet
Video recording doesn’t work for me, help me figure it out, I press the button and nothing happens in qgc. mk15
What camera are you using?
I already found out that the camera that comes with the mk15 cannot record, I’m unpleasantly surprised…
Does the camera come with an SD card slot?
This is a standard camera that comes with the siyi mk15; it does not have any slot. There are only two flashlights, but I already read it; it’s just that the instructions say that you can record, but the qground Control button is not activated on the remote control. But it’s okay, it doesn’t matter. I used Screen Recorder, I’m worried about another question: how to use the keys on the remote control to reduce the volume and adjust the brightness.
And the second question is that in the Siri fpv application in telemetry the current consumption data is incorrectly displayed and there are also strange symbols where the flight mode is located
