With PPM receiver, Ch 6 pass through not working

ArduCopter Copter 3.1
1

With PPM receiver, Channel 6 pass through not working in Arducopter 3.1.2 however its working in Arduplane 2.78b

I am using 4 channel Receiver from Frsky. In PPM mode, This receiver outputs upto 8 channels on the PPM stream and also have PWM type RSSI.

On the quad side, I have assigned APM 2.6 output ch 6 to the zoom control for my 10x zoom cam.

APM 2.6, output Ch 7 is assigned to the recording On/Off operation.

It seems that there is bug in the Arducopter 3.1.2, which needs to be taken care.

2

pass through does not work currently on copter.
You can do the same feature by configuring mount tilt/roll to be controlled by an input ch (not stabilized) and it will work the same.

3

[quote=“billbonney”]pass through does not work currently on copter.
You can do the same feature by configuring mount tilt/roll to be controlled by an input ch (not stabilized) and it will work the same.[/quote]

Hi Bill !
Randy told me that channels pass through is yet no implemented in Arducopter but it will be done soon in future.
Thanks a lot for your suggestion, its working for me for the timer being.

Regards
Rana