Wild thumper with sabertooth

Can anyone tell me if I need a “high powered switch” or can I just use a high amp toggle
to switch on the 2 cell lipo to the wild thumper?Also,I had to replace 2 motors in the past month and I don’t know why their failing.I’m using pixhawk powered by 3 cell lipo.


From what I read, wild thumper motor are 7,2 V max but 3S lipo is 11V, so you are overloading your motor .
ArduRover doesn’t have voltage limiter for now …

I’m using 2 cell for motors and 3 cell for pixhawk.