Volantex Quadplane idea

ArduPlane Plane 3.8
1

Good day and thank you for reading.

Please have a look at the attached picture and let me know what you think of my layout.

The idea is not to modify the wing at all but to instead build a Vtail Quad placing the front rotors where the wheels are and placing the V somewhere close to the tail at around a 10 degree tilt.

v4.jpg869×280 23.3 KB

The orange box is where the AP will be and the green elliptic circles is where the V motors would be more or less. Would I be able for example to install the AP in that position under the Vquad configuration without having to make any additional configuration settings.

Thanks again for reading.

2

The idea is not to modify the wing at all but to instead build a Vtail Quad placing the front rotors where the wheels are and placing the V somewhere close to the tail at around a 10 degree tilt.

You can’t afford to have the props obstructed by the wing - it lookslike
your front props are underneath the wing.

I learnt this the hard way :slight_smile:

3

What happened to your plane?