Hello all,
I have Turnigy 9x with stock firmware and when changing modes with 3-way switch I can only output these signals on CH6.
As I use SBUS I cannot switch cables between CH5 and CH6 physically.
In parameters list I found RCMAP options but there is no option available to change modes channel.
Any idea to solve this problem without flashing my Tx with er9x firmware?
ReNNo,
I’m afraid that we don’t allow configuring which channel is used for the flight mode. It’s on the to-do list but we haven’t gotten to it yet.
github.com/diydrones/ardupilot/issues/1974
[quote=“ReNNo”]Hello all,
I have Turnigy 9x with stock firmware and when changing modes with 3-way switch I can only output these signals on CH6.
As I use SBUS I cannot switch cables between CH5 and CH6 physically.
In parameters list I found RCMAP options but there is no option available to change modes channel.
Any idea to solve this problem without flashing my Tx with er9x firmware?[/quote]
I use a Turnigy 9XR with stock FW and can change the output around in the settings. I’m pretty sure you can do the same on the 9X.
Scratch that, wow just looked at the 9X manual, wow that is really limited. I’d suggest updating the firmware but that would require modding the TX.
I ended up flashing my Tx to ER9X firmware.
But channel mapping features on all channels would be helpful.