Testing CAMERA_FEEDBACK via Mission Planner

First off, sorry if this has been asked before or if this should be posted somewhere else - i’m not even sure what i should be searching for. FYI, i am working with a Pixhawk 2.1 in Plane.

I’m currently in the process of setting up and troubleshooting my camera triggering and feedback setup. I can test the trigger-relay via Mission Planner and as far as i can tell it’s working (KAP registers USB->high and triggers the shot).

Is there an easy way to “dry test” (i.e. without actually flying, just with the Pixhawk+camera setup connected to MP) whether or not camera feedback is registered correctly?

EDIT: Nevermind, just discovered the green photo icon…