Temperature reading with MP

[Loren_DS]

Hi,
I have a two sensor temperature at my helicopter and my transmitter can read them, but only reaches 1km.
I would like to know if there is a temperature sensor (up to 200ºC) to integrate into the autopilot and to be able to view the temperature with the MP telemetry and be able to control the temperature beyond 1km.

[ZvikaF]

Hello

Check this thread

Temperature Sensing

I use that sensor on piston helicopters with the rpm hooked to the magneto primary and the temp sensors for engine temp and OAT. It does not work with Mission Planner directly but it does work with FrSky telemetry and the temp sensors can be used to sense temperature of anything you want to attach the sensor to. The temp sensors are thermistors. I have several custom Lua Scripts I have written for helicopters that displays combined FrSky sensor telemetry with ArduPilot telemetry using a C&T tele…

[Loren_DS]

This sensor BMP280 only reaches 85ºC , do you know one that reaches 200ºC?
Thanks for your information @ZvikaF

[ZvikaF]

I do not use temperature sensors, so i do not know.
Check Chris Olson notes, mentioned using thermistor and thermocouples.
also check Frsky sp-rpm sensor

FrSky SP-RPM - Smart Port RPM and Dual Temperature Sensor

[Loren_DS]

ok @ZvikaF thanks…