T-motor flame 180hv esc calibration

I am stuck trying to calibrate this escs, the esc doesn’t behave the documentation expects it to and every content about it I was able to find appears to show an esc with same name, but has a different number of wires.

Can anyone give some tips to calibrate ?

For T-Motor Flame ESC set these and don’t even bother to try and calibrate (even though the pamphlet says to)
MOT_THST_EXPO,0.2 to 0.4

For motor thrust expo the rule is:

  • set too high you can see instability at low throttle
  • set too low you can see instability at high throttle
1 Like

thank you for the answer, I will try these parameters