Servers by jDrones

Serial connection of range finder to CubeOrange

Hi,
I am in the process of changing my CubeBlack to Orange.

On my Black the LightWare SF11/C was connected to serial 5.

On the Orange serial 5 is used for ADSB so how can I connect the range finder? I prefer not to cut and solder for the telem2 if I can avoid it?
Also, serial 5 used to be for debug, how it is done on the adsb carrier board?
Thanks
Gal

Debug is located on the bottom of the carrier board.

Really your going to have to change the connector on the range finder or get an adapter cable.

1 Like
Servers by jDrones