RE: Power, Signal, GND on the BBBlue Servo Headers

Hardware Linux
1

Hello,

Would I need to supply 6v, 3.3v, and GND to the 4-in-1, 20A ESC(s)? I am asking b/c the 4-in-1 ESC only came w/ signal and GND pins for the Servo Headers.

Seth

P.S. Would I need to supply the extra 6v of the Servo Header to the ESCs for flight for BHeli_S ESCs?

1 Like
2

Hello,

Trouble, trouble, trouble. I know, I know. So, I am not completely sure how to use QGC now b/c I altered my 16 channel to 8 channels.

Now, my QGC is not allowing me to calibrate the radio.

Anyway…here is the screenshot.

RadioCalib
RadioCalib1053×511 41.2 KB

…

So, there it is. Um, do I need 16 channels. I say no but I cannot use the transmitter on the calibration settings for the Radio any longer.

Seth

3

Hello,

And on QGC, what is the deal w/ the .bin file from the logs. Is there a way to check these files for items of interest?

Seth