RC controlled contact closure

ArduCopter Copter 3.5
1

Does arducopter support an RC-controlled switch? I see the “relay” feature, but that switches between 0 and a voltage like 3.3v or 5v.

Can a Pixhawk (or Navio2) output be configured as a simple contact/no-contact switch?

Thanks,

Paul

2

No problem configuring it to activate a PWM controlled switch if that’s what you mean.

3

No, I was hoping there was an actual switch on-board already. Ordered an RC-controlled switch with a relay that should do the job.

Thanks Dave,

Paul