Hey im Setting up a quadplane with V-tail, two ailerons and x quadcopter setup.
is that connection right?
Pin 1 = Aileron
Pin 2 = Elevator ( VTAIL)
Pin 3 = Throttle
Pin 4 = Rudder (VTAIL)
Channel 5: Front right motor, counter-clockwise
Channel 6: Rear left motor, counter-clockwise
Channel 7: Front left motor, clockwise
Channel 8: Rear right motor, clockwise
pin 9 Aileron 2?
Q_ENABLE 1
Q_FRAME_CLASS 0
Q_FRAME_TYPE 1
VTAIL_OUTPUT 1-4
any tips`?