Servers by jDrones

QGC shows your rover does not support fence

Most time my QGC shows your rover does not support fence when click radio button of the fence in the QGC. I tried to open Mission Plan first, then open QGC again, the fence works. weird.

And I use USB read the parameter from rover, it is success, but use Sik radio, most time is failed, it shows does not support fence.

Yes, I’ve seen this as well and it is very odd. I’ve reported it previously here but we may need to re-raise the issue.

You’re using a very recent version of QGC?

We use latest version I think. Ver. 3.5.5

You need to be using a Daily Build of QGC for ArduPilot fence to work.

1 Like
Servers by jDrones