Problem configuring the Cam Trigger Servo!

Hi there.

i have a problem with my pixhawk 4 and the servo connection. Iam using mission planner to configure the ardupilot firmware on the pixhawk. in the pictures below, you can see my settings for the servo.

iam using the PM07 and my motors (iam flying a quad) are connected to the fist four pins (see picture). My servo is connected at pin number 5. The servo is used as a cam trigger for a gopro. But no matter what pin i connect to the servo - nothing happens!

i dont know what my failure is. iam sure, ist a stupid little thing… but i cant find it. maybe someone can help my.

Thank you 😉




servo4

Problem is solved! Thread can be closed.