Pixracer R15 Decoupling Capacitor

Hardware Pixhawk family
1

While using a Pixracer R15, I accidentally powered the board with 6V instead of 5V.
This caused a small SMD component near the servo power rails to fry; I suspect it is a power rail decoupling capacitor because both logic and power circuitry still work.

Can anybody direct me to a relevant schematic/PCB design file for the Pixracer R15 so I can find the value of this component and replace it?

2

Here you go. https://github.com/ArduPilot/Schematics/tree/master/mRobotics

3

just take care while you will unsolder the component… just add also no clean flux for solder it again.
For clean you can use alcohol