Pixhawk mini external led and usb

Hardware Pixhawk family
1

G’day guys need some advice/help.
How would I wire this into the pixhawk mini.
Pixhawk RGB Flight Control led

2

I think you need a i2c split board, and wiring like this below:

led
led602×755 229 KB

3

My px4 mini has different plugs.
That fc is px1 I think.

4

There are other I2C splitters with the different plugs.
The generally have a single compatible plug for the flight controller then the standard JST connector for the I2C devices.
In most cases you just need an adapter cable. DF13 on one end and what ever connector is on the FC.
Like this one.
image
Some even have a JST GH on both ends to allow passthru for GPS and then split out the I2C from the GPS connection. Since some devices don’t have them split already.
Like this one.

Another version. I like these.


This one takes the GPS input and allows for GPS out, plus 3 ports for just 4 pin I2C