Pixhawk-6C can not control T-Motor Flam 200A ESC

[copilot (JaSw)]

Maybe you can try this:

T-motor flame 180hv esc calibration

For T-Motor Flame ESC set these and don’t even bother to try and calibrate (even though the pamphlet says to) MOT_THST_EXPO,0.2 to 0.4 MOT_PWM_MIN,1100 MOT_PWM_MAX,1940 For motor thrust expo the rule is: set too high you can see instability at low throttle set too low you can see instability at high throttle