Servers by jDrones

Pixhawk 2 Mini Carrier Board USB and Buzzer port

Hey,

As part of the Mini Carrier Board Cable Set, there is a nice looking USB extension integrated into the buzzer cable. Unfortunately the cable does not power the board nor the buzzer work in TELEM1/2 or GPS2 ports. The cable does not fit in the CAN2 port and there’s no explicit USB port on the mini carrier. Anyone know if the cable works with the mini carrier?

The normal buzzer pilfered from a pixhawk1 works and the direct usb to the purple cube works fine too.

Ta, Tim

Servers by jDrones