OpenTX and Crossfire using Mavlink no flight mode telemetry sensor (FM)

[Allister (Allister Schreiber)]

Have a look at this thread. You will need to connect CRSF and MAVLINK on two UARTS to get it to work. But seriously, don’t get your hopes up.

Connecting RC by MAVLINK, Crossfire, Matek F405 Wing

Hi guys, Recently also got a TBS full size TX and a Diversity Nano RX. TX is set to dynamic power sitting on my desk, stock antenna’s, currently on 10mW TX power. I’ve got the matek F765 board, and am also having issues connecting to Mission planner. Setup is as follows: Mission planner on PC -> UDP connection -> phone wifi hotspot -> XF Wifi (on the TX) -> nano RX -> Mavlink2 -> Flight controller (set to mavlink2 on telem1 to suit this configuration) I’m using firmware 4.10 on the full si…