Hello, I cannot get any movement on channel 5 and 4, even if channel 1,2,4 and 5 even if these are set in
channel 1= rudder
channel 2= elevator
channel 3= throttle
channel5= balance rudders ( ailerons)
The plane is in manual mode.
I am running Arduplane V4.0.9
Balance and flaps does not move, rudder and elevator is working.
Does anyone know what the issue might be?
Parameter file: https://www.dropbox.com/s/brd8e5e96ltm4ho/params.param?dl=0