Greetings.
So this morning my drone decided to have a hickup with one motor not spinning after arming, have no idea why, which lead to an invedable flip over.
I received a crash detection message on my ground station but noticed that the motors did not stop spinning even after holding the stick bottom left where I usually disarm the motors. I also tried using the safety switch but this also did not stop the motors from spinning. I had to unplug the battery.
https://drive.google.com/drive/folders/19HO5E-xlkIEUp4ySz8ZLvaXxFfx-Exqa?usp=sharing