Hey this is interesting to me. My current set up is a orange cube that has four tmotor 35 BLHeli32 escs connected to 4 AUX ports for DShot. What seems to happen is after the drone has been powered for a while (~4 hours+), If I try to arm the motors I hear the arm tone but the motors don’t spin. after doing a FC reboot, all the ESCs initialize again and they start spinning after arming. I check the logs and I find that the ESCs are still reporting voltage and current.
Is there a timeout of some kind that disconnects the signal to the ESCs if the drone has been on for a long period of time?