Mission Planner Radio Calibration

Ground Control Software Mission Planner
1

So I have a hexacopter that is using a Ardupilot orange cube / with a Archer R8 Pro Reciever / and a Taranis Q X7 transmitter. My problem is that when trying to calibrate the radio calibration in mission planner no signs of signals can be found. My Reciever is connected to the transmitter and has a green light, the reciever is connected to the RC plug.

What is the reason to why I cannot seem to get any respond on the mission planners radio calibration?

2

If mission planner does not show radio input, it means that the autopilot does not see any in the RCin pins.
Check cabling and make sure that the s.bus signal is indeed coming out of your receiver.