Mission Planner does not display Altitude or Speed for ADSB vehicles

Ground Control Software Mission Planner
1

Now that Mission Planner is reliably displaying ADSB data from my raspberry pi (thanks @Michael_Oborne), I’m finding that it’s not displaying all the available information about the vehicle that the ADSB is supplying. The big ones for avoidance purposes are altitude and speed, which are definitely in the data feed.

Screen Shot 2022-02-12 at 12.00.40 PM
Screen Shot 2022-02-12 at 12.00.40 PM754×500 181 KB

This is a shot of the data MSG,3 messages from the same timeframe:

Screen Shot 2022-02-12 at 12.00.56 PM
Screen Shot 2022-02-12 at 12.00.56 PM1722×500 121 KB

Of course this is on my Mac! (daily build from 11 Feb 2022)

QGroundControl doesn’t reliably display the vehicle, but when it does, from the same data feed, will display the altitude, speed and callsign of the vehicle.