Is my cube dead guys? Something weird happened when testing some stuff, it seems like something has shorted on the cube. It sound like this and red leds are very bright and not detected by the pc. Are there hope that only my carrier board is dead?
Here is the short video of its behavior:
I have heard somewhat similar noises from the buzzer prior to the booting music plays. but it never stays after the tones.
Try disconnecting all and connect via the USB Port on the carrier?
Tried but no luck. Also tried higher power still no luck
Some updates:
Powering the cube from the servo rails does make the second red led not turn on, the buzzer sound is also gone in this case. But I still can’t make any connections to it.
The Cube cannot be powered from the servo rail.
Only power it from the USB port or the Power ports.
Try powering from the USB/buzzer cable.
I have tried all three ways, no luck
