Hi,
My name is Mike,I have a issue with my drone
I have a pixhawk 2.4.8, from amazon(Amazon.com)
i was able to make a drone and configuration ,but I the problem is that does not fly , I re calibrate the ESC many times, I am able to arm but at the end, it does not have enough thrust to fly
using sunny-sky 800 kv and 60a ESC Hawk ZTW
10/19/2021 9:37:36 PM : Frame: QUAD/X
10/19/2021 9:37:36 PM : IMU0: fast sampling enabled 8.0kHz/1.0kHz
10/19/2021 9:37:36 PM : RCOut: PWM:1-12
10/19/2021 9:37:36 PM : Pixhawk1 00200039 3339510E 34383938
10/19/2021 9:37:36 PM : ChibiOS: 08877972
10/19/2021 9:37:36 PM : ArduCopter V4.1.0 (ea559a56)
10/19/2021 9:37:36 PM : Frame: QUAD/X
10/19/2021 9:37:36 PM : IMU0: fast sampling enabled 8.0kHz/1.0kHz
10/19/2021 9:37:36 PM : RCOut: PWM:1-12
10/19/2021 9:37:36 PM : Pixhawk1 00200039 3339510E 34383938
10/19/2021 9:37:36 PM : ChibiOS: 08877972
10/19/2021 9:37:36 PM : ArduCopter V4.1.0 (ea559a56)
10/19/2021 9:37:35 PM : Frame: QUAD/X
10/19/2021 9:37:35 PM : IMU0: fast sampling enabled 8.0kHz/1.0kHz
10/19/2021 9:37:35 PM : RCOut: PWM:1-12
10/19/2021 9:37:35 PM : Pixhawk1 00200039 3339510E 34383938
10/19/2021 9:37:35 PM : ChibiOS: 08877972
10/19/2021 9:37:35 PM : ArduCopter V4.1.0 (ea559a56)
any help will be appreciate
thank you