Hi I am pretty new to this and I have just managed to get my APM hooked up to my mac using the latest planner 2.0.
My problem is as follows:
Flashed the APM with USB no problem at all. Then try to connect and only on one occasion have I ever had a link to the unit which has allowed me to go to the next set of settings. When connecting the usb the power light come son and the blue light flashes for a few seconds and then stops. Currently only have the green light stable and I can’t do anything. Is there something I have done wrong?
Please help…
Further to the above I had a look in the communications window and managed to pull the following;
Opened port!
Link usbmodemfd111 is connected.
Init ArduCopter V3.1.2 (ddd4d881)
Free RAM: 1599
FW Ver: 120
load_all took 1755us
0xfe 3 0x00 0x01 0x01 0xfd 0x01 No dataflash inserted 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xc2 3COMPASS INIT ERROR
Press ENTER 3 times to start interactive setup
0xfe 3 0x01 0x01 0x01 0xfd 0x01 Calibrating barometer 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 _R
PANIC: AP_Baro::read unsuccessful for more than 500ms in AP_Baro::calibrate [1]
anyone got ideas?